| Prosess Number |
Photos | Comments |
| 1 |  |
complete up to the rough cut in the traditional way |
| 2 |  |
put the rough-cut face into the formwork |
| 3 |  |
fill the mold with plaster liquid |
| 4 |  |
remove hardened plaster from the mold |
| 5 |  |
fill the plaster with wood powder clay A wrapping sheet may be used instead of a release agent. |
| 6 |  |
When the wood powder clay hardens, remove it from the mold. Fill the mold with wood powder clay for the dried and shrunk size. The shrinkage ratio is about 10%. |
| 7 |
 |
The surface is finished with sandpaper, etc., and then painted using traditional coloring methods. |
